| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN THE MACHINE ON AND PUSH THE BRUSH BUTTON TO LOWER THE BRUSH DECK. TURN MACHINE OFF.
|
| 2 |
|
SLIDE THE BRUSH OUT FROM BRUSH DECK.
|
| 3 |
|
REMOVE THE 5 SCREWS HOLDING THE BRUSH DECK COVER.
| Wrench-Allen metric 5.0mm |
|
|
| 4 |
|
REMOVE THE SCREW FROM THE BUMPER WHEEL.
| Wrench-Allen metric 5.0mm |
|
|
| 5 |
|
SLIDE THE BRUSH COVER FROM BRUSH DECK.
|
| 6 |
|
NOTE: THE BRUSH DECK HAS BEEN REMOVED FROM THE MACHINE FOR ILLUSTRATION PURPOSES ONLY. YOU WILL NOT NEED TO REMOVE THE BRUSH DECK. LOCATE THE 4 BRUSH GEARS ON THE BRUSH DECK. TURN GEARS TO CHECK FOR LOCKED UP CONDITION OR DAMAGE SUCH AS, CRACKS OR LOOSE GEARS. IF GEARS MOVE FREELY, THE GEARS ARE NOT LOCKED UP. REPEAT STEPS 1 THRU 6 TO CHECK OTHER BRUSH BELT GEARS. NOTE: WHEN REINSTALLING THE GEARS, THE POINTER ON THE GEAR NEEDS TO BE LINED UP WITH THE SLOT ON THE BASE PLATE.
|